ABOUT US ABOUT US PRODUCTS PRODUCTS RESOURCES RESOURCES APPLICATIONS APPLICATIONS CONTACT US CONTACT US
Furnaces / Muffles

Read all about your Furnace/muffle Options

Construction,  Voltage, Phase  Termination,  Mounting,  Sensing.

We help you find the right fit.

Home Home
Products Products
Furnaces / Muffles Furnaces / Muffles
Furnace / Muffle Menu
Electrical Termination Options
Flag Type
Image
The flag type terminal consists of a flat piece of stainless steel that is .350" (8.9 mm) wide x .032" (0.81mm) thick with a .187" (4.75 mm) hole near its end. This is our preferred termination option because of an excellent electrical contact attained with this type of connection.

Stud Type

ImageThe stud type terminal consists of a threaded stud that exits the heater to create an electrical connection. A number of connection lengths and stud sizes are available. The disadvantage of a stud type terminal is the electrical current limit of the stud. Because an electrical current is only carried on the threads of the stud, amperage is usually kept below six amps when applying a stud type electrical connection.

Wire Leads
Image
Once the terminals exit the heater, wire leads can be attached for an easy electrical connection. A high- temperature wire is crimpled into a high-temperature ring terminal, which is attached to the electrical terminal using stainless steel hardware. The wire leads can be constructed for any required length.
Home | About Us | Products | Furnaces / Muffles | Resources | Applications | Contact Us

©2007 Solar Products, All Rights Reserved                                 Developed & Hosted by impressM, LLC