Solar Products Inc. offers many different infrared electric heaters including quartz composite face heaters (F/FBA Series), opaque fused quartz face heaters (Q-Series), quartz tubes (T-Series), metal/glass face heaters (M and G series), revolutionary fast response medium wave panel heater (V - Series), and specialty heaters.
Mounting weld studs are commonly located on the back of the heater near each corner. As a heater's length exceeds 36", stud(s) are added in its center. This is Solar Products preferred mounting option.
The mounting studs size options are as follows:
Width
Length
1/4" x 20"
1/2"
3/4"
1"
1-1/4"
8mm
25mm
Mounting Stud
Nuts
Mounting nuts are commonly located on the back of the heater near each corner. As a heater's length exceeds 36", nut(s) are added in its center. The mounting nut size options are as follows:
Description
Available Nut Sizes
Snap-in Nut
1/4"x20"
5/16"x18"
3/8"x16"
Compression Nut
1/4"x20"
5/16"x18"
3/8"x16"
Snap in Nut
Compression
End Pieces
One last mounting option is to use special metal clips or brackets on the ends of the heater in lieu of the studs or nuts. This approach can simplify the heater installation for certain applications.
